Bambu Studio
Prepare plates, slice, check your printers, and start prints from the Bambu Studio project you have open.
How the connection works
Vector installs a small adapter for Bambu Studio and works on the project you have open. When you connect while Bambu Studio is running, the adapter is ready after Studio restarts. Later adapter updates install the next time Bambu Studio closes.
- Operating system
- Windows 10 or later, x64
- Application
- Bambu Studio, installed on the same PC
Connect
- 1
Open Integrations
In Vector, open Settings → Integrations.
- 2
Connect Bambu Studio
Select Connect… next to Bambu Studio. Vector installs the adapter.
- 3
Restart Bambu Studio if asked
If Studio was open, restart it so the adapter loads.
- 4
Confirm
Bambu Studio shows as Connected in Integrations.
What Vector can do in Bambu Studio
| Area | What Vector does |
|---|---|
| Project | Reads plates, objects, filaments, and the effective print settings of the open project. |
| Settings | Changes process settings such as layer height and wall loops. Each change can be undone. |
| Plates | Arranges and orients objects, splits parts, assigns filaments, and sets height ranges. |
| Slicing | Slices a plate and reports print time, material use, and slicer warnings, layer by layer. |